Juke AWD L4-1.6L Turbo (MR16DDT) (2011)
3. If this bulletin applies and you have performed ECM reprogramming, the screen in Figure 2 appears when reprogramming is complete.
NOTE:
If the screen in Figure 2 does not display (reprogramming does not complete).
NOTE:
^ This bulletin does not cover any specific customer concern.
^ Performing the ECM reprogramming in this bulletin will allow the EVAP Vent Control Valve to be operated with C-III in "Active Test" or "Work
Support" mode.
^ Additional diagnostics may be needed if there are specific concerns.
CLAIMS INFORMATION