nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Clutch Pedal Assembly > < Clutch - Poor Release/Difficult Shifting
Page 1
background image

Hydraulic Hose: All Technical Service Bulletins
Clutch - Poor Release/Difficult Shifting

Reference:

Date:

TECHNICAL BULLETIN

TS87-095

May 25, 1987

Classification:

Section:         Models:

MT87-005

Manual Transmission

1985-1987 Maxima

CLUTCH TUBE LEAK

APPLIED MODEL:

1985-1987 Maxima with manual transaxle

SERVICE INFORMATION

Some 1985-1987 Maxima vehicles equipped with a manual transaxle may exhibit poor clutch release which results in difficult shifting. An inspection of
the clutch operating cylinder tube may reveal a pin hole fluid leak near the brazed bracket joint. A new cylinder tube assembly with a rubber insulated
joint at the bracket is now available to reduce this incident.
PARTS INFORMATION

PART DESCRIPTION NEW PART       

NUMBER       

FORMER PART NUMBER

Clutch Operating

30810-42E00

30810-26E00

Cylinder Tube Assembly

Install the new cylinder tube assembly using care to avoid kinking the tube. The special cylinder tube installation procedures described in Technical
Bulletin TM86-006 are not necessary with the new clutch tube. Therefore, disregard Technical Bulletin TM86-006.

WARRANTY INFORMATION

Refer to Section HA in the Warranty Flat Rate Manual for Warranty Information.

Clutch Pedal Assembly > < Clutch - Poor Release/Difficult Shifting