Murano FWD V6-3.5L (VQ35) (2004)
/Page-2162006.png)
Top Rear Edge of Door Panel
(Refer to Figure 2 if needed.)
^
Apply one piece of felt cloth tape as show (see Figure 10).
^
Use felt cloth tape 68370-4B000 from the Squeak and Rattle Kit.
Top Rear Inside Edge of Door Panel
(Refer to Figure 3 if needed.)
^
Apply two pieces of felt cloth tape on inside of rear edge as show in Figure 11.
^
Use felt cloth tape 68370-4B000 from the Squeak and Rattle Kit.
Reinstall the door panel and make sure the tick noise is gone.
