Murano FWD V6-3.5L (VQ35DE) (2006)
13. Disconnect alternator connector.
14. Remove "B" terminal nut.
15. Remove ground harness clip and ground harness mounting nut.
16. Remove alternator mounting bolt, using power tools.
17. Remove alternator bracket mounting bolt and alternator bracket.
18. Remove alternator upward.
NOTE: Move alternator to battery side, then remove alternator upward.
ALTERNATOR PULLEY INSPECTION
Perform the following.
-
Make sure that alternator pulley does not rattle.
-
Make sure that alternator pulley nut is tight.
Alternator pulley nut:
Torque : 74 N.m (7.5 kg-m, 55 ft-lb)
INSTALLATION
Installation is the reverse order of removal.
-
Install alternator, and check tension of belt. Refer to EM-13, "Checking Drive Belts". See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Drive Belt/Testing and Inspection
CAUTION: Be sure to tighten "B" terminal nut carefully.