Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
From VIN # 350001
ABS Actuator and Electric Unit
REMOVAL
1. Disconnect battery cable.
2. Drain brake fluid.
3. Remove mounting bracket fixing bolts and nuts.
4. Disconnect connector, brake pipes and remove fixing nuts and actuator ground cable.
INSTALLATION
CAUTION: After installation, refill brake fluid. Then bleed air.
1. Tighten actuator ground cable. Place ground cable at a notch of mounting bracket.
2. Connect brake pipes temporarily.
3. Tighten fixing bolts and nuts.
4. Tighten brake pipes.
5. Connect connector and battery cable.