Quest Minivan SE V6-3.3L (VG33E) (1999)
Power Steering Pump: Service and Repair
PRE-DISASSEMBLY INSPECTION
Disassemble the power steering pump only if the following items are found.
-
Fluid leak from any point shown in the figure.
-
Deformed or damaged pulley.
INSPECTION
Pulley And Pulley Shaft
-
If pulley is cracked or deformed, replace it.
-
If fluid leak is found around the pulley shaft oil seal, replace the seal.
DISASSEMBLY
CAUTION:
^
Parts; which can be serviced are strictly limited.
^
Disassemble in as clean a place as possible.
^
Clean your hands before disassembly.
^
Do not use rags; use nylon cloths or paper towels.
^
When disassembling and reassembling, do not let foreign matter enter or contact the parts.
-
Remove snap ring, then draw drive shaft out.
-
Be careful not to drop drive shaft.
-
Remove oil seal.
-
Be careful not to damage front housing.
ASSEMBLY