Rogue 2WD L4-2.5L (QR25DE) (2008)
6. Remove hose clamps (1) and fluid cooler hose C (2).
<---: Vehicle front
7. Remove hose clamps (3) and fluid cooler hose D (4).
8. Remove fluid cooler (5).
9. Remove fluid cooler tubes and bracket.
INSTALLATION
Note the following, and install in the reverse order of removal.
^
The illustrations indicate the view from the hose ends.
<---: Upper
^
When installing hose clamps the center line of each clamp tab should be positioned as shown in the figure.