nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

All Other Service Bulletins for Brake Pad: > < Brakes - Explanation of Common Noises
Page 2
background image

^

while the vehicle is barely moving, with light brake pedal force

^

more noticeable during warm, dry weather

^

most common on vehicles with automatic transmission

 
This noise is common on most cars with front disc brakes. There are no repair procedures to eliminate this noise.
 
3.

SQUEAKING/SQUEALING NOISE
^

noise occurs with light to medium pedal force

^

noise occurs during low speed stops (5-20 mph)

^

more noticeable during warm, dry weather

 
This noise is common on vehicles with high-performance potential that must be able to stop in short distances from high speeds.  Other brands of brake
pads may eliminate this noise, but Nissan does not recommend them because they may have reduced pad life or inadequate performance in high speed
stops.
 
4.

HIGH-PITCHED SQUEAKING/SCRAPING NOISE
^

whenever brakes are applied

^

may come from just one wheel

Nissan uses pad wear indicators on many of its disc brake pads to provide an audible warning when the brake pads need replacement.  Spring steel tabs
that are riveted to the brake pad scrape lightly on the rotor surface when the pad is worn down to its lowest limit.  The customer should hear the noise at
this time and bring the vehicle to the dealer for brake pad replacement.  The pad wear indicator will not damage the rotor surface if the pad is replaced in
a reasonable time.
 
Replace worn pads with new parts.  Check the rotor surface for damage and machine if necessary.

All Other Service Bulletins for Brake Pad: > < Brakes - Explanation of Common Noises