nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Radiator Cap > < Radiator|Removal and Installation
Page 1
background image

Radiator: Service and Repair
Checking / Cleaning Radiator

CHECKING RADIATOR 
Check radiator for mud or clogging. If necessary, clean radiator as follows.

NOTE: Be careful not to bend or damage the radiator fins.

When radiator is cleaned without removal, remove all surrounding parts such as cooling fan shroud and horns. Then tape the harness and
connectors to prevent water from entering.

CLEANING RADIATOR

1. Apply water by hose to the back side of the radiator core vertically download.
2. Apply water again to all radiator core surfaces once per minute.
3. Stop washing if any stains no longer flow out from the radiator.
4. Blow air into the back side of radiator core vertically download.

Use compressed air lower than 490 kPa (5 kg/cm2, 71 psi) and keep distance more than 30 cm (11.8 inch).

5. Blow air again into all the radiator core surfaces once per minute until no water sprays out.

Radiator Cap > < Radiator|Removal and Installation