Achieva L4-144 2.4L DOHC VIN T SFI (1996)
Gear Positioning
5. With the hydraulic modulator upside down, and the gears facing you, rotate each hydraulic modulator gear counterclockwise until movement
stops. This procedure will position the pistons very close to the top of the hydraulic modulator bore.
6. Motor pack to hydraulic modulator/master cylinder assembly.
7. Four Torx head screws.
TIGHTEN
-
Torx head screws to 5 Nm (44 lb. in.).
8. Gear cover to hydraulic modulator/master cylinder assembly.
TIGHTEN
-
Torx bolts to 4 Nm (36 lb. in.).
Master Cylinder and Hydraulic Modulator Assembly (with ABS)
ABS Hydraulic Modulator Assembly Removal