Alero L4-144 2.4L DOHC VIN T SFI (2000)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging. See: Refrigerant/Service and Repair
2. Disconnect the refrigerant pressure sensor electrical connector.
3. Remove the bolt holding the compressor hose bracket to the fan shroud.
4. Remove the compressor hose to condenser nut.
5. Remove the compressor hose from the condenser.
6. Remove and discard the O-ring seal.
7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
8. Remove the right wheelhouse splash shield.
9. Remove the nut holding the compressor hose to the accumulator.
10. Remove the compressor hose from the accumulator.
