Alero L4-144 2.4L DOHC VIN T SFI (2000)
Wiper Motor: Service and Repair
Wiper Motor Cover Replacement
REMOVAL PROCEDURE
1. Remove the wiper arm assemblies from the vehicle.
2. Remove the air inlet grille panel from the vehicle.
3. Remove the connector from the wiper motor.
4. Remove the 3 screws and the wiper drive system module from the vehicle.
5. Remove the following components from the wiper motor assembly:
^
Three screws
^
The pulse circuit board
^
The cover assembly
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.