Aurora V6-214 3.5L VIN H SFI (2001)
Important: When reusing the window belt seal strip, the flange mounting area (2) must be pinched together in order to counteract the
splaying effect when removed. Use a thumb and an index finger in order to pinch the carrier (3) back together.
2. Work from one end of the seal strip to the other.
3. Position the door window inner belt seal strip over the flange of the door inner panel.
Important: Do not distort the seal strip.
4. Press down in order engage the door window inner belt seal strip the entire length of the door.
5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement See: Front Door Panel/Service and Repair