Cutlass L4-138 2.3L VIN A FI HP (1990)
CAMPAIGN IDENTIFICATION LABEL
Each label provides space to print the campaign number, and the five (5) digit dealer code of the dealer performing the campaign. Insert this information
with a typewriter or ballpoint pen. When installing label, clean and dry the surface of the radiator support tie bar and apply the campaign label where it is
readily visible.
PARTS INFORMATION
To ensure that the parts your dealership may require are obtained as soon as possible, order them from GM Service Parts Operations (GMSPO) on a
C.I.O. order, with NO special instruction code, but order on an advise code (2). Use the following part number:
Description
Part Number
Quantity Per Vehicle
Controlled Rotation Bracket
10192005
1
Kit, consisting of:
Right Bracket
10192006
1
Left Bracket
10192007
1
Adhesive
10192008
4 (6 supplied)
Nut
10169859
2
NOTICE:
DURING THE EARLY STAGES OF THIS PRODUCT SAFETY CAMPAIGN, GMSPO MAY RESTRICT THE NUMBER OF
KITS WHICH MAY BE REQUESTED ON ANY ONE ORDER DUE TO PARTS AVAILABILITY.
Special Tool and Warranty Info.
SPECIAL TOOL
Each dealer will be shipped a Shoulder Belt Guide Loop Holder tool, J 39049, from Kent-Moore, during the week of February 11, 1991. The tool is
being furnished at no charge to the dealer. Each tool package will be identified with Oldsmobile Campaign Number 90CO7. Additional tools, if required,
may be ordered from Kent-Moore and will be charged to the dealer's open account. Fleet Warranty Stations may obtain information on how to purchase
tools from Kent-Moore by calling 1-800-345-2233 and asking for the "order desk".
WARRANTY CLAIM INFORMATION
Submit claims using only one of the labor-ops below for each vehicle:
REPAIR PERFORMED
TOT-PTS
FC
LAB-OP
LHRS
Install CRB on Left And Right
96
V6520
.4*
Shoulder Belt Upper Guide Loop
*
.1 hour for clerical administration may be added to the published labor hours.
Parts Allowance:
Current dealer price, plus 30% allowance for handling.