Cutlass V6-191 3.1L VIN M SFI (1998)
D Measurement
25. Measure distance (1).
26. Push the rear bumper down approximately 38.0 mm (1 1/2 in).
27. Gently remove hand and let vehicle rise on its own.
28. Repeat twice for a total of 3 times.
29. Measure the-dimension (1).
30. Calculate the average of the high and low measurements in order to determine the true heights.
31. In order to measure the trim height for the D dimension (1), lift the rear bumper of the vehicle up to approximately 38.0 mm (1 1/2 in).
32. Gently remove your hands.
33. Let the vehicle settle.
34. Repeat this procedure a total of three times.
35. Measure the dimension (1).
36. Push the rear bumper down approximately 38.0 mm (1 1/2 in).
37. Gently remove hand and let vehicle rise on its own.
38. Repeat twice for a total of 3 times.
39. Measure the dimension (1) from the rocker panel to the ground (2).
40. Calculate the average of the high and low measurements in order to determine the true heights.