Cutlass V6-191 3.1L VIN M SFI (1998)
Stabilizer Link: Service and Repair
Front Suspension
REMOVAL PROCEDURE
1. Remove the nut (4) attaching the stabilizer link to the stabilizer shaft (1).
2. Remove the bolt (8), the insulators (6), the spacer (7), and the washers system (5).
INSTALLATION PROCEDURE
1. Install the bolt (8), the insulators (6), the spacer (7), and the washers system (5).
2. Install the nut (4) attaching the stabilizer link to the stabilizer shaft (1).
Tighten
-
Tighten the nut to 30 N.m (22 lb ft).