Cutlass Ciera Cruiser L4-151 2.5L (1985)
Labor Operation:
J0840
Labor Time:
3.9 Hrs.
Add:
To Replace Crankshaft Gear
.1 Hr.
Locking Wheel Covers
.2 Hr.
1982-86 Cutlass Ciera
Labor Time:
4.2 Hrs.
Add:
With A/C
.1 Hr.
To Replace Crankshaft Gear
.1 Hr.
Locking Wheel Cover
.2 Hr.
Calais and Cutlass Calais Service Procedure
Tools Required:
J 28467-A
Engine Support Fixture (with Long Hooks)
J 24420-B
Cam Gear Removal Tool
J 25033-B
Cam Gear Installation Tool
J 34995
Crankshaft Front Cover Oil Seal Installer
J 8001
Universal Dial Indicator with Magnetic Base
Remove or Disconnect
1.
Negative battery cable.
2.
Accessory drive belts.
3.
Power steering pump mount bolts - lay pump aside.
4.
Drain coolant (1985-86 ONLY).
5.
Timing pointer plate (1985-86 ONLY).
6.
Body ground strap.
7.
Front end sheet metal diagonal brace (R.H.).
8.
Install engine support fixture - J 28467-A per service manual.
9.
Upper front engine mount-to-body bolts (2).
10.
Raise vehicle.
11.
Right front wheel.
12.
Right front brake line-to-body bracket.
13.
Right front wheelhouse engine splash shield.
14.
Flywheel cover.
15.
Crankshaft pulley (have assistant hold flywheel).
16.
Rear engine mount-to-bracket nuts and mount through bolts.
17.
Rear transaxle strut - automatic transaxle only (as applicable).
18.
Lower front engine mount-to-body bolt (leave mount attached to engine).
19.
Retaining bolts from right side front suspension support (6).