Cutlass Ciera Cruiser L4-151 2.5L (1985)
3.
Apply RTV sealant to timing gear cover sealing surfaces.
4.
Timing gear cover to engine.
5.
Lower vehicle.
6.
Raise engine assembly with support fixture.
7.
Through bolt in rear transaxle mount.
8.
Retaining bolts (2) in front engine mount.
9.
Raise vehicle.
10.
Retaining nuts (2) and through bolts (2) in right front engine mount.
11.
Retaining bolt (1) in left front engine mount.
12.
Place axle stand under right front suspension support, raise into position and fasten with retaining bolts (6).
13.
Place axle stand under left front suspension support, raise into position and fasten with retaining bolts.
14.
Crankshaft pulley and bolt (with assistant).
15.
Flywheel cover and bolts.
16.
Engine splash shield.
17.
Brake line-to-body bracket.
18.
Right front wheel.
19.
Lower vehicle.
20.
Transaxle bracket to transaxle mount long bolt.
21.
Remove engine support fixture.
22.
Timing pointer plate (1985-86 ONLY).
23.
Engine coolant (1985-86 ONLY).
24.
Engine oil (replace oil filter).
25.
Power steering pump mount bolts to engine.
26.
Accessory drive belts.
27.
Front end sheet metal diagonal brace (R.H.).
28.
Body ground strap.
29.
Negative battery cable.
30.
Check front wheel toe-in and adjust if necessary.
Inspect
-
For oil and coolant leaks with engine running at operating temperature.
-
For proper completion of repairs.
Warranty Information
1987 Calais and 1988 Cutlass Calais
