Intrigue V6-3.8L VIN K (1998)
Trim Panel Replacement: Upper Center Pillar - Removal Procedure
1. Remove the seat belt upper guide loop attachment.
2. Remove the upper trim panel from the A-pillar using J38778.
3. Remove the upper trim panel from the vehicle.
4. Reposition the weatherstrip.
INSTALLATION PROCEDURE
Trim Panel Replacement: Upper Center Pillar - Removal Procedure
1. Align the upper trim panel to the A-pillar.
2. Press firmly on the upper trim panel until the retainers are fully seated.
3. Install the seat belt upper guide loop attachment.
Rear Quarter Lower Trim
REMOVAL PROCEDURE
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover