Intrigue V6-3.8L VIN K (1998)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement (Right Rear)
REMOVAL PROCEDURE
1. Disconnect the battery ground (negative) cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Remove the fuel injector sight shield. Refer to Engine Cover Replacement See: Engine/Service and Repair.
3. Remove the exhaust crossover pipe from the right (rear) exhaust manifold.
4. Raise and suitably support the vehicle.
5. Remove the EGR adapter pipe from the right (rear) exhaust manifold.
6. Remove the three way catalytic converter.
7. Remove the wiring harness and the heater hose retaining clips from the fuel injector sight shield bracket.
8. Remove the right (rear) spark plug wires.
9. Remove the right (rear) engine lift bracket bolt and nut.
10. Remove the right (rear) engine lift bracket.
11. Remove the fuel injector sight shield bracket nuts.
12. Remove the fuel injector sight shield bracket.