Intrigue V6-3.8L VIN K (1998)
1. Connect the vacuum actuator push rod from the defrost valve lever.
2. Carefully rotate rearward and downward to align actuator slots with HVAC module case and push the vacuum actuator toward the HVAC module
to secure the retaining tab.
3. Connect the vacuum lines to the defroster vacuum actuator.
4. Install the cross vehicle beam.
With Dual Zone A/C
Removal Procedure
1. Remove the cross vehicle beam.
2. Disconnect the vacuum lines from the defroster vacuum actuator.
3. Rotate the defroster valve lever fully rearward (counterclockwise), then carefully insert a screw driver between the bottom of the defrost valve
