Intrigue V6-3.8L VIN K (1998)
Sunroof / Moonroof Module: Service and Repair
Power Sunroof Module Replacement
REMOVAL PROCEDURE
Power Sunroof Module Replacement: Removal Procedure
1. Position the sunroof in the fully closed position.
2. Remove the headliner.
3. Disconnect the sunroof motor electrical connectors.
4. Disconnect the express module electrical connectors.
5. Remove the front drain hoses from the sunroof housing.
6. Remove the rear drain hoses from the sunroof housing.
IMPORTANT: A helper will be required to support the sunroof module when removing the nuts and bolts.
7. Remove the two push-in retainers.
8. Remove the sunroof housing nuts at the sunroof brackets.
9. Remove the sunroof module bolt at the motor bracket.
10. Remove the four sunroof module bolts through the module brackets and into the side rail.
11. Remove the six sunroof module bolts to the roof.
IMPORTANT: A helper will be required to assist in the removal of the sunroof module from the vehicle.
12. Remove the sunroof module from the vehicle through the door opening.
INSTALLATION PROCEDURE
IMPORTANT: A helper will be required to assist in the installation of the sunroof module into the vehicle.
Power Sunroof Module Replacement: Installation Procedure
