Intrigue V6-3.8L VIN K (1998)
Air Bag Control Module: Service and Repair
Installation Procedure
1. Install the SDM (2) to the floor pan (3).
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the SDM mounting fasteners (1).
Tighten
Tighten fasteners to 10 N.m (89 lb in).
3. Install the SDM harness connector to the SDM.
4. Install the Connector Position Assurance (CPA) to the SDM harness connector.
5. Install the carpet and the passenger front carpet retainers. Refer to Carpet Retainer Replacement in Interior Trim.
6. Install the passenger front seat. Refer to Seat Replacement - Front Bucket in Seats. See: Restraint Systems/Seat Belt Systems/Seat Belt
Buckle/Service and Repair
7. Enable the SIR system. Refer to Enabling the SIR System. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair/Air Bag Disarming and Arming/Enabling the SIR System
