Intrigue V6-3.8L VIN K (1998)
INSTALLATION PROCEDURE
1. Install the manual 2-1 band servo (106-116).
2. Install the manual 2-1 band servo cover gasket (105) into the case.
3. Install the manual 2-1 band servo cover (104).
4. Install the manual 2-1 band servo cover bolts/screws (103).
^
Tighten the manual 2-1 band servo cover bolts/screws (103) to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the accumulator (132).
6. Install the accumulator bolts/screws (131).
^
Tighten the accumulator bolts/screws (131) to 12 Nm (106 inch lbs.).
7. If removed, install a new filter seal.
8. Install the filter.
9. Install the oil pan.