Intrigue V6-3.8L VIN K (1998)
7. Install the automatic transaxle range selector cable to the shift control.
8. Install the automatic transaxle range selector cable end retainer.
9. Install the automatic transaxle range selector cable to the retainers in the passenger compartment.
10. Use the cable molded ends in order push the cable core ends together until the cable cores lock together within the cable core connector.
NOTICE: Adjust the automatic transaxle range selector cable while the transaxle and while the gear selector are in the Neutral position only.
Failure to do so may cause mis-adjustment.
IMPORTANT: Ensure that the transaxle AND the shift control are in Neutral.
11. Press the adjuster clip down to the first detent. This will allow the adjuster spring to move the cable halves together.
