Silhouette FWD V6-3.4L VIN E (2004)
Seat Belt Retractor: Service and Repair
Right Front
SEAT BELT RETRACTOR REPLACEMENT - RIGHT FRONT
TOOLS REQUIRED
J 29843-9 Door Lock Striker and Seat Belt TORX(R) Wrench
REMOVAL PROCEDURE
IMPORTANT: The front passenger's seat belt assembly attaches to the body side frame locking center pillar.
1. Remove the plastic cover (2) from the shoulder belt guide.
2. Remove the upper guide loop anchor nut.
3. Remove the center pillar upper trim panel.
4. Remove the center pillar lower trim panel.
5. Remove the plastic escutcheon (3) where the retractor side seat belt webbing exits the center pillar.
6. Use the J 29843-9 in order to remove the bolt (3) from the seat belt retractor (2).
7. Remove the seat belt retractor from the center pillar (1).
8. Remove the 2 nuts securing the front seat to the floor.
9. Remove the 2 nuts securing the front seat to the floor.