Colt Wagon 2WD L4-1468cc 1.5L SOHC (1990)
3. Apply grease to drive axle, then install boots.
4. Position tripod joint spider on drive axle, then install snap ring.
5. Apply 2.8-3.2 ounces of special grease to tripod joint housing, then insert drive axle and spider into housing.
6. Apply another 2.8-3.2 ounces of special grease to tripod joint boot.
7. Apply as much special grease as removed to Rzeppa joint, if necessary.
8. Install bands and boots for each joint. When installing boot bands for tripod joint, bands must be positioned 3.1 inches apart (dimension A).
