Neon L4-2.0L DOHC (1996)
Trim Panel: Service and Repair
B-Pillar Trim-4 Door
B-Pillar Trim
REMOVAL
1. Remove bolt holding lower seat belt anchor to floor pan kick-up.
2. Remove shoulder belt height control knob.
3. Remove bolt holding turning loop to belt adjuster.
4. Remove access cover from B-pillar trim.
5. Disengage clips holding trim to B-pillar.
6. Feed seat belt turning loop and seat belt through trim panel.
7. Separate B-pillar trim from vehicle.
INSTALLATION
1. Position B-pillar trim panel near B-pillar.
2. Feed seat belt turning loop and seat belt through trim panel.
3. Align locating pins on backside of trim panel to mating holes in B-pillar.
4. Push clips on trim panel into slots in B-pillar.
5. Install access cover to B-pillar trim.
6. Install bolt holding turning loop to belt adjuster.
7. Install shoulder belt height control knob.
8. Install bolt holding lower seat belt anchor to floor pan kick-up.