plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Dash Panel <--> [Dashboard / Instrument Panel] > < Center Console Latch - Broken
Page 1
background image

Console: Service and Repair

Floor Console

REMOVAL

1. Fully apply parking brake.
2. Remove screw cover plugs over screws just rearward of cupholders.
3. Remove screws holding console to floor bracket just rearward of cupholders.
4. Open console storage compartment lid, if so equipped.
5. Remove screw cover plugs over screws near rear of console, if vehicle is equipped with a non-armrest console.
6. Remove screws holding console to floor bracket.
7. Remove shift lever knob, if vehicle is equipped with a manual transmission.
8. Lift console upward over gear selector and park brake handle.
9. Separate console from vehicle.

INSTALLATION

1. Move floor console into position in vehicle.
2. Install screws holding console to floor brackets.
3. Install screw cover plugs.
4. Install shift lever knob, if vehicle is equipped with a manual transmission.
5. Release parking brake and close console storage compartment lid, if so equipped.

Dash Panel <--> [Dashboard / Instrument Panel] > < Center Console Latch - Broken