Prowler V6-3.5L VIN G (1999)
Note: When removing the center cap from the wheel do not use a sharp or hard tool. Use of such a tool can damage the finish on the wheel and
damage the center cap.
Center Cap Removal
16. Remove center cap from wheel. Center cap is removed by inserting a trim stick into notch on center cap and prying it off wheel.
17. Remove rear wheel and tire assembly.
Park Brake Cable At Actuator
18. Remove park brake cable from park brake shoe actuator located at rear of caliper adapter.
Park Brake Cable Removal From Caliper Adapter
19. Remove park brake cable from caliper adapter. Park brake cable is removed from caliper adapter by pushing a 1/2 inch box wrench onto end of
park brake cable retainer. This will collapse retaining fingers on park brake cable retainer and push park brake cable out of caliper adapter.
