Bonneville V8-4.6L VIN Y (2004)
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the engine front cover bolts in the sequence shown.
^
Tighten the engine front cover bolts in proper sequence to 10 Nm (89 inch lbs.).
6. Install the crankshaft balancer.
7. Install the bolts (3) securing the engine mount bracket (1) to the engine.
^
Tighten the engine mount bracket bolts (3, 4) to 50 Nm (37 ft. lbs.).
8. Install the nut (2) securing the power steering hose to the engine mount bracket (1).
^
Tighten the nut to 9 Nm (80 inch lbs.).
9. Install the nut securing the engine mount to the engine mount bracket.
^
Tighten the mount nut to 80 Nm (59 ft. lbs.).
10. Remove the engine support jack.
11. Lower the vehicle.
