Fiero V6-173 2.8L (1986)
FIGURE 10 - THIRD GEAR
12.
Shift the transaxle into third gear (fig. 10).
13.
Install transaxle in vehicle and adjust shift cables per the 1987 Fiero Preliminary Service Manual supplement.
14.
Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number, the five digit dealer code of the dealer performing the campaign service, and the date
vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. Install the label only on a clean, dry surface of the radiator
baffle where it is readily visible. Close hood. (Additional campaign labels are available on stationery order as Form 7901-709.)
CLAIM INFORMATION
A separate repair order must be used for each vehicle. A completed warranty claim is to be kept as a permanent record of completion.
DEALERS SHOULD SUBMIT WARRANTY CLAIMS FOR CREDIT IN THEIR NORMAL MANNER WHEN THEY PERFORM THE SERVICE
AS FOLLOWS:
Other*
Failure
Labor
Labor
Labor
Operation
Code
Operation
Hours
Hours
Inoperative trans-
96
V3640
.2
.1
mission inspection only
Install detent
96
V3641
6.0
.1
holder interlock spacer plate
*In addition dealerships will receive 0.1 hours credit for dealer administrative services associated with this campaign. The 0.1 hours allowance is to be
entered in the "Other Labor Hours" field with each campaign repair listed for credit. This entry will not require authorization.
FAILURE CODE 96 MUST BE USED WITH THE LABOR OPERATION.
Parts will be supplied to dealers by Pontiac and therefore no part number will be listed on the repair order or warranty claim. An allowance of $8.08
should be entered as a net items figure in the sublet column of the warranty claim to receive proper credit. The $8.08 figure represents a 30% parts