Firebird V8-5.7L VIN G (2001)
Cruise Control Servo Cable: Adjustments
Cruise Control Cable Adjustment (With RPO NW9)
1. Lift the adjustment lock button (1) up.
2. Pull the cable adjustment slider (2) rearward until all slack is removed from cable, but without opening the throttle.
3. Push down the cable adjustment lock button (1) until it snaps and locks in place
IMPORTANT: Ensure that cable is correctly adjusted to avoid excess slack which will cause degraded cruise and traction control performance and
inability to achieve wide open throttle. If cables are set too tight the throttle will not fully close.
4. Ensure that the locking tabs are secure on both sides.
"For a description of the RPO Code(s) Shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application and
ID." See: Application and ID/RPO Codes
