pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Cruise Control Cable Replacement (Without RPO NW9)|Page 9819 > < Cruise Control Cable Adjustment (Without RPO NW9)|Page 9816
Page 1
background image

Cruise Control Servo Cable: Service and Repair
Cruise Control Cable Replacement (Without RPO NW9)

REMOVAL PROCEDURE

1. Rotate the throttle lever rearward.
2. Push down the cable end to remove it from the throttle lever pin.
3. Using a flat bladed tool, push in the cable retainer at the throttle body bracket.
4. Slide the cruise control cable up from the throttle body bracket.
5. Remove the cruise control cable from under the accelerator/cruise control cable servo bracket.

6. Remove the cruise control cable clip from the brake booster.
7. Raise and suitably support the vehicle.
8. Remove the left front bumper fascia lower deflector. Refer to Air Deflector Replacement - Front Bumper Fascia in Bumpers.

Cruise Control Cable Replacement (Without RPO NW9)|Page 9819 > < Cruise Control Cable Adjustment (Without RPO NW9)|Page 9816