G6 V6-3.5L (2009)
Air Bag Control Module: Service and Repair
Inflatable Restraint Sensing and Diagnostic Module Replacement
Removal Procedure
Caution: Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it
is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR
deployment, personal injury, or unnecessary SIR system repairs.
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
2. Remove the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
3. Remove the automatic transmission shift control, if equipped. Refer to Transmission Control Replacement (See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/4T45-E - Automatic Transmission/Transmission Control
Replacement).
4. Remove the park brake lever assembly. Refer to Parking Brake Lever Replacement (See: Brakes and Traction Control/Parking Brake
System/Parking Brake Lever/Service and Repair/Parking Brake Lever Replacement).
5. Remove the inflatable restraint sensing and diagnostic module nuts.
6. Remove the inflatable restraint sensing and diagnostic module wire harness connector.
7. Remove the inflatable restraint sensing and diagnostic module.
Installation Procedure