pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 9254 > < Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 9252

G6 V6-3.6L (2007)

Page 2
background image

1.  Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
2.  Install the CMP actuator solenoid valve.

Notice: Refer to Fastener Notice.

3.  Install the CMP actuator solenoid valve bolt.

Tighten the bolt to 10 Nm (89 lb in).

4.  Connect the engine wiring harness electrical connector (2) to the bank 2 intake CMP actuator solenoid valve.
5.  Install the engine mount strut bracket.

Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 9254 > < Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 9252