G6 V6-3.6L (2007)
2. Install the J 29074-A in order to support the clutch cover to the flywheel assembly.
Notice: Refer to Fastener Notice.
3. Install the clutch cover to flywheel bolts (1, 2, 3, 4, 5, 6).
1. Follow the tightening sequence. Tighten the bolts to 24 N.m (18 lb ft).
2. Tighten the bolts to specifications. Refer to Fastener Tightening Specifications.
4. Remove the J 29074-A.
5. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
6. Install the transmission. Refer to Transmission Replacement.
7. Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding.
8. Connect the negative battery cable.
