G6 V6-3.6L (2007)
Fluid - M/T: Service and Repair
Transmission Fluid Replacement
Transmission Fluid Replacement
Important: To ensure that all sediment within the transaxle is suspended in the fluid, the fluid should only be drained after it has reached
a normal operating temperature of 88-93°C (190-200°F). Normal operating temperature is reached after approximately 25 km (15 miles)
of highway driving.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Caution: The transaxle fluid is hot. Caution must be taken to prevent personal injury when the transaxle fluid drains from the transaxle.
2. Remove the transaxle drain plug (1) and allow the transaxle to drain completely.
Notice: Refer to Fastener Notice.
3. Clean and install the transaxle drain plug.
Tighten the transaxle drain plug to 50 N.m (37 lb ft).
4. Lower the vehicle.
