G6 V6-3.9L (2009)
7. Clean the water pump mating surfaces.
Installation Procedure
1. Position a NEW water pump gasket and the water pump to the engine front cover.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the water pump bolts.
Tighten the bolts to 25 Nm (18 lb ft).
3. Install the water pump pulley and bolts.
4. Install the drive belt. Refer to Drive Belt Replacement (Coupe) (See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service
and Repair/Drive Belt Replacement (Coupe))Drive Belt Replacement (Convertible) (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Drive Belt Replacement (Convertible)).
5. Tighten the water pump pulley bolts.
