G6 V6-3.9L (2009)
Air Door Actuator / Motor: Service and Repair
Mode Valve Actuator Replacement
Mode Valve Actuator Replacement
Removal Procedure
1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
3. Remove the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
4. Remove the mode actuator retaining screws.
5. Remove the mode actuator.
6. Disconnect the mode actuator electrical connector.
Installation Procedure