G6 V6-3.9L (2009)
Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair).
17. Install the liquid line bracket bolt.
Tighten the bolt to 10 Nm (89 lb in).
18. Install the refrigerant pressure sensor.
Tighten the bolt to 5 Nm (44 lb in).
19. Install the refrigerant pressure sensor wire harness connector.
20. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Procedures/Refrigerant
Recovery and Recharging).
21. Leak test the fittings using the J 39400-A .
22. Install the surge tank to the surge tank bracket.