G6 V6-3.9L (2009)
7. Connect the control valve body TCM electrical connector (1).
8. Install the front transmission mount. Refer to Transmission Front Mount Replacement (See: Transmission Mount/Service and Repair/6T40/6T45
- Automatic Transmission/Transmission Front Mount Replacement).
9. Install the left front fender liner. Refer to Front Fender Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
10. Install the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Left Side).
11. Lower the vehicle.
12. Install the oil cooler inlet (1) and outlet (5) hoses to the retainer (2) on the control valve body cover.
13. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
14. Fill the transmission. Refer to Transmission Fluid Replacement (See: Service and Repair/Removal and Replacement).
15. Check for leaks.
Control Valve Body Replacement
