G6 V6-3.9L (2009)
Note: Install all bolts before tightening, then tighten in specified sequence.
4. Install the 8 control valve body bolts (1) M6 x 65 and tighten to 12 Nm (106 lb in).
5. Install the 2 control valve body bolts (3) M6 x 55 and tighten to 12 Nm (106 lb in).
Caution: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter
plate to the control solenoid valve assembly, resulting in possible damage or contamination.
6. Install a NEW control solenoid valve assembly filter plate (1).
7. Install the control solenoid valve body and TCM assembly (5).
8. Rotate the control solenoid valve spring (7) into position.
Note: Install all bolts before tightening, then tighten in specified sequence.
9. Install the 4 control valve body bolts (1) M6 x 80.