pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Campaign - Faulty Ignition Coil|Page 3517 > < Campaign - Faulty Ignition Coil|Page 3515
Page 5
background image

12.

Install new "yellow tab" coil(s) to the cover, as required. Install coil harness connectors to both coils.

13.

Reinstall the housing (item 7 in Figure 1) to the cover (item 1) with four screws (item 4); torque screws to 4 N-m (35 lb.in.).

14.

Install the ignition system assembly to the engine while carefully aligning boots to the spark plug terminals.

15.

Coat the four bolts, ignition system assembly to cam housing, with P/N 1052080 sealer (or equivalent). Install the bolts through the cover to the
cam housing and torque to 20 N-m (15 lb.ft.).

NOTICE:

If the above bolts are not coated with sealer prior to reinstallation, future removal of the bolts may strip the threads in the
aluminum of the cam housings.

16.

Reconnect the negative battery cable. In the interest of customer satisfaction, please reset (to the extent possible) all devices that lost their memory
after the battery was disconnected (not required if a memory retention tool was used).

17.

Install a Campaign Identification Label.

Campaign Identification Label

Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the campaign number, the five digit dealer code of the dealer performing the campaign service, and the date the
vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. Install the label only on a clean, dry surface of the radiator
baffle where it is readily visible. (Additional campaign labels are available on stationery order as Form 7901-709.)

Claim Information

A separate repair order must be used for each vehicle. A completed warranty claim is to be kept as a 
permanent record of completion.

DEALERS SHOULD SUBMIT WARRANTY CLAIMS FOR CREDIT IN THEIR NORMAL MANNER WHEN THEY PERFORM THE SERVICE 
AS FOLLOWS:

*Other

Failure

Labor

Labor

Labor

Operation

Code

Operation

Hours

Hours

Inspect Ignition Coils Only

96

V6510

0.3

0.1

Inspect And Replace Ignition

96

V6511

0.3

0.1

Coils

Inspect Owner's Prior Repair

96

V6512

0.2

0.1

Orders, and Confirm That 
Two "Yellow Tab" Coils Had Been 
Installed (Two P/N 10472748 
Coils Or Both Coils From 
Kit P/N 10457062)

Owner Reimbursement For Prior

96

T4680

---

---

Repair

NOTICE:

It should be rare that the "Inspect Only" labor operation is required.  Also, it should be rare to find an engine with one ignition coil with a
yellow electrical tab and one coil with a black tab. It is necessary only to replace those ignition coils with black electrical tabs (see Figure
2).

*In addition, dealerships will receive 0.1 hour credit for dealer administrative services associated with this campaign. The 0.1 hour allowance is to be
entered in the "Other Labor Hours" field with each campaign repair listed for credit. This entry will not require authorization.

Campaign - Faulty Ignition Coil|Page 3517 > < Campaign - Faulty Ignition Coil|Page 3515