Grand AM V6-3.4L VIN E (2001)
3. Connect the thermostat bypass pipe hose.
4. Using the J38185, reposition and secure the hose clamp at the thermostat bypass pipe.
5. Install the thermostat bypass pipe to the throttle body stud.
6. Install the thermostat bypass pipe-to-throttle body nut.
Tighten the thermostat bypass pipe-to-throttle body nut to 25 Nm (18 ft. lbs.).
7. Connect the heater outlet hose to the thermostat bypass pipe (2).
8. Connect the throttle body inlet and outlet hoses to the thermostat bypass pipe (1).
9. Connect the inlet hose at the thermostat housing.