Grand AM V6-3.4L VIN E (2001)
Air Door Actuator / Motor: Service and Repair
Mode Actuator Replacement
REMOVAL PROCEDURE
1. Remove the Instrument Panel (IP) carrier. Refer to Trim Pad Replacement - IP in Instrument Panel, Gauges and Console.
IMPORTANT: Note the location of the hoses.
2. Disconnect the yellow vacuum hose (1) and red vacuum hose (2) from the mode actuator.
3. Remove the recirculation actuator.
3.1.
Lift the actuator lock tab.
3.2.
Slide off the actuator.