Grand AM V6-3.4L VIN E (2001)
Center Mounted Brake Lamp: Service and Repair
HIGH MOUNTED STOPLAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment.
2. Remove the nuts from the high mounted stop lamp.
3. Depress the retainers on each end of the high mounted stop lamp housing.
4. Remove the high mounted stop lamp from the rear compartment lid.
5. Disconnect the electrical connector from the high mounted stop lamp.
6. Remove the lens from the high mounted stop lamp housing by pushing up on the lens with your thumbs to release the retainers, if required.
7. Remove the bulb(s) from the socket(s), if required.