Grand AM V6-3.4L VIN E (2001)
2. Install the inlet pipe to the oil pan bolt.
Tighten the inlet pipe bolt to 26 Nm (19 ft. lbs.).
3. Connect the radiator hose to the inlet pipe.
4. Install the transaxle-to-engine block brace.
5. Install the engine splash shield.
6. Install the tire and wheel assembly.
7. Lower the vehicle.
8. Install the coolant inlet pipe bolt through the exhaust manifold.
Tighten the coolant inlet pipe bolt to 14 Nm (124 inch lbs.).
9. Install the exhaust manifold heat shield.
10. Fill the cooling system.