Grand Prix V6-3.8L (2007)
1. Install the exhaust crossover pipe seal (4) to the exhaust crossover pipe (1) at the right exhaust manifold connection.
2. Install the exhaust crossover pipe (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust crossover pipe studs (3) and the bolts (2).
Tighten the studs and the bolts to 20 N.m (15 lb ft).
4. Install the exhaust crossover heat shield (2).
5. Install the exhaust crossover heat shield nuts (1).
Tighten the nuts to 20 N.m (15 lb ft).
6. Install the air cleaner intake duct.
7. Install the fuel injector sight shield.
