pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 9925 > < SIR Disabling and Enabling Zones|Page 9923
Page 8
background image

1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow connector (3) to the vehicle harness yellow connector (1).
3. Install the CPA to the steering wheel module coil yellow connector (1).
4. Install the left sound insulator to the I/P (2).

5. Install the SIR Fuse.
6. Close the underhood fuse center cover.
7. Use caution while reaching in and turn the ignition switch to the ON position.

The AIR BAG indicator will flash then turn OFF.

8. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -

Restraint Systems.

SIR Disabling and Enabling Zone 5

SIR DISABLING AND ENABLING ZONE 5

DISABLING PROCEDURE

IMPORTANT:  Refer to SIR Service Precautions.

SIR Disabling and Enabling Zones|Page 9925 > < SIR Disabling and Enabling Zones|Page 9923